New RS500 Rollover Sensor

 

The RS500 is Liquip’s latest generation of rollover sensor technology, engineered to deliver higher reliability and accuracy, faster installation, and improved operational visibility for dangerous goods transport and heavy vehicle applications. The RS500 represents Liquip’s continued focus on safety, innovation, reliability and compliance.

Built for the harshest operating conditions, the RS500 combines automotive-grade technology with intelligent diagnostics and Liquip’s LEADR App connectivity to help operators improve vehicle safety and compliance.

The RS500 enables vehicles to meet the legal requirements of rollover sensing (AS2809:1; 2023) while providing a major step forward in rollover protection technology. Featuring dual processors, dual accelerometers and single fault tolerant relay controls, the sensor continuously cross-verifies data to maximise accuracy and reliability. 

If a rollover event occurs, the RS500 signals the battery isolation switch to isolate electrical power sources, helping minimise the risk of ignition and improving overall vehicle safety. The RS500 incorporates advanced inbuilt filters, resisting high vibration, power surges and preventing accidental shutdowns by rejecting any reading that would not result in a rollover e.g. bumps.

Two key advancements in the new RS500 are a single plug connection for quick and streamlined installation as well as seamless integration with the Liquip LEADR App, which enables commissioning, testing, reporting and auditing across fleets directly from the iOS and Android compatible app. 

Built for extreme operating conditions and temperatures, the RS500 is rated to +85°C and is housed in a fully sealed IP69K enclosure. This housing offers the highest level of ingress protection, allowing the unit to withstand high-pressure and high-temperature washdowns. This upgraded protection level makes the sensor well suited for harsh industrial and road transport environments where performance cannot be compromised.

Additional operational features include an on-unit fault detection LED and optional dash-mounted indicator lamp for immediate fault visibility.

Manufactured in Australia and supported by Liquip’s nationwide service network, the RS500 has been built specifically for operators who require dependable rollover protection in high-risk transport applications. 

Recommended products for replacement

Features & Benefits
  • Meets AS2809 - Vehicle Rollover Device and utilises dual processors and dual accelerometers for maximum reliability and accuracy.
  • The device will not be activated at less than 45° to the vertical.
  • Automotive-grade design with single fault tolerant relay controls, continuous cross-verification, and self-diagnostics.
  • Built for the worlds harshest climates, engineered to withstand extreme temperatures of +85°C and above.
  • IP69K rating and a fully sealed design offers the highest level of ingress protection.
  • Suitable for 12V or 24V systems.
  • Single plug connection offers quick and seamless installation.
  • Quick and Easy in-situ testing using Liquip's proven integrated hinge design.
  • Resistant to power surges.
  • Liquip App offers commissioning, testing, reporting
  • On-unit fault detection LED, with optional dash-mounted indicator lamp.
  • Can also be used to operate a Liquip engine strangler to ensure the vehicle engine stops.
  • Made in Australia.
Technical Information

Operating voltage range
9V to 32V DC.

Typical Current Draw (Vin)
35mA.

Reverse polarity protected
Yes.

Ambient Temperature
-40°C to +85°C.

Ambient Humidity
0% to 100%.

Initial Startup Time
7 seconds required for self-check.

Mobile App Support
Android or iOS app compatible used with Liquip's LEADR.

Over the air firmware upgrade
Yes. Firmware authenticated and validated.

Telemetry Logs
Self-diagnostic and event capture every 10 seconds while in motion, every 10 minutes when stationary
Up to 272 hours of data is captured with wrap.
Self-powered continuous trip logging ensures trip event is captured.

Data privacy/protection
Encrypted, company authorized log extraction.

Real Time Clock
Set during production or via LEADR mobile app; time retained for up to 26 days if RS500 is unpowered.

NOHP relay
Continuous switch to ground (sink 25A, 32Vdc). Internally fused.

NOLP, COM
Normally open bidirectional switch (150mA, 32Vdc). Internally fused.

NCLP, COM
Normally closed bidirectional switch (150mA, 32Vdc). Internally fused.

NOHP single fault tolerant
Yes.

Remote Status Lamp relay
Normally open switch (current sink 1A, 32V). External fuse recommended.
A slow current LED lamp will be: a) ON when system is operating correctly. b) blink if there a fault, c) OFF if RS500 is unpowered or wiring disconnected. 

Wireless Connection
Bluetooth® 5.4

Rollover detection safety
Yes, single fault tolerant (sensors, NOHP).

Rollover Angle
50° ± 2° (within temperature range)

Rollover time
2.7s ± 0.1s

LEDS
Green- POWER status: solid is good, flashing uncalibrated
Red-Rollover status: solid indicates rollover detected
Tricolour: Blue blinking=data transfer, Orange blinking=Warning Status, Red blinking= Critical Fault, OFF (default).

Testing Method
Remove pin(s) and manually rotate in either direction.

Ingress Potection Rating
IP69K.

Automotive Qualified Parts
Yes.

Approvals
ACMA RCM.

Standards Compliance
UN ECE Reg 10; RF radiated emissions
ISO 7637-2 2011; automotive transient immunity
ISO 16750-2 2012; automotive overvoltage, centralized load dump, starting profile
AS2809:1;2023.

Battery Isolation Switch Compatibility
The RS500 roll over sensor is compatible with most common battery master isolation switches and will provide enhanced safety when used with battery isolation switch available via Liquip.

Brand

Series

Models

Compatible Harness

Compatible Models

BAXTERS

T-Switch

TSW12V / TSW24V / TSW12VPP /

RS500-NOHP

RS500

DPS

DPS-1202 / DPS-2402

RS500-NOHP

RS500

LUCAS

12V/24V

ACX3440 / ACX3441 / ACX3441CLEAD /
BMS-12BMS-K-12L / BMS-24L / 196SA

RS500-NOHP

RS500

OEX

B-Safe

ACX3493HD / ACX3492HD

RS500-NOHP

RS500

ETA

12V

BMS01

RS500-NOHP

RS500

OCEANIA

Dual 12V

ACX3494HD / ACX3492HD /
LV5010K /
BMS-K-12L / LV5010K /
BMS-K-12L / LV5010K

RS500-NOHP

RS500

REDARC

12/24V

BMIS-4PP /
BMIS-4PNV2 /
BMIS-4PPV2

RS500-NOHP

RS500

KISSLING

 

87-3-10XX

RS500-NOHP

RS500

GSL

 

BMS-12K-L

RS500-NOHP

RS500

MENBERS

 

BMS106, BMS107

RS500-NOLP

RS501

Ordering Information

RS500: Rollover Sensor 12/24v - c/w High Power Harness

RS501: Rollover Sensor 12/24v - c/w Low Power Harness

Associated Equipment

LIQRS500-NOHP : Harness for Normally Open High-Power Control of BIS

LIQRS500-NOLP : 
Harness for Normally Open Low-Power Control of BIS

MES3
: 3” Mechanical Engine Strangler. 

MES5: 5” Mechanical Engine Strangler.

TSW12K: Manual 500amp Isolation Switch 12V.

TSW24K: Manual 500amp Isolation Switch 24V.

Resources
Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
Submit Enquiry 
Submit a product Enquiry / Quote to Liquip customer service
Save as Wishlist 
Save as Wishlist - handy function for account holders
Send to a Friend 
Send you selection of products to a friend via a convenient email link
Image Item Description
Add Item into Enquiry Cart
ASSEMBLIES
RS500 ROLLOVER SENSOR 12/24V - C/W HIGH POWER HARNESS
RS501 ROLLOVER SENSOR 12/24V - C/W LOW POWER HARNESS
HARNESSES
RS500-NOHP Harness for Normally Open High-Power Control of BIS
RS500-NOLP Harness for Normally Open Low-Power Control of BIS

Item added into a Enquiry Cart

Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.

Related Products

Interested?

Contact us for a quote or for further information.
Are you enquiring about multiple products? Consider using our Enquiry Cart


CUSTOMER SERVICE


 
NEWSLETTER

Success

Error

   File:Instagram icon.png - Wikipedia