Categories

R Series Hosereels

Liquip’s all new R-Series drum style hosereels provide the perfect balance of strength and reduced weight to allow for increased payload capacity.


Liquip hosereels are designed for tough conditions and the R-Series is no exception. Beyond incorporating Liquip’s proven technologies that work flawlessly in high pressure applications, Liquip’s efforts were concentrated on re-engineering the hosereel design to reduce weight whilst withstanding the harshest operating environments and offering exceptional quality and usability.

Featuring an all new stainless steel manifold, aluminium base frame, drum and cheek plates, and a self aligning bearing, it’s clear that no stone has been left unturned during the development of the R-Series reel.

The R-series is suitable for use in petroleum and aviation applications. Liquip offers a range of drum widths and supplies the hosereel ready to accept a hydraulic motor as standard to ensure the perfect solution for all applications.

Other drive types will be offered soon e.g. manual and pneumatic motor rewind.

  • Lightweight design for increased payload capacity.
  • 38mm flow path throughout.
  • The stainless steel manifold and 1½“ BSPT gooseneck allow for multiple product compatibility.
  • The aluminium exterior eliminates the need for additional painting or coatings.
  • Manifold, shafts and seal components can be easily accessed from the outside providing ease of service and maintenance.
  • Can be driven by hydraulic motor. (Contact Liquip for other drive methods).
  • • Incorporates a flexible hose connection to ensure longevity of the hosereel.
  • A range of drum lengths available with the same hose capacity as their predecessors.
  • Left or Right hand configurable to ensure flexibility during installation.
  • Supplied as standard with an anti-rotation lock to prevent hose unravelling.
  • All reels are Australian made and supported through Liquip’s distribution network.

Max allowable working pressure
Up to 2,100 kPa

Mounting
4 x M10 Bolts - see mounting footprint on following pages.

Periodic Service
Annually - check O-rings and replace as required.

Rewind Options
Hydraulic

Inlet and Outlet
(reducers required for sizes below 1½” BSPT)

Suits the following diameter hose:
25mm (1”)
32mm (1¼”)
38mm (1½“)

Materials
-Stainless steel 304 manifold, gooseneck and wetted
components
-Aluminium cheek plates and drum.
-Nitrile seals.

Drum widths
310mm (12”)
460mm (18”)
610mm (24”)

Weights (approx) (less motors)
310mm - 19 kg
460mm - 20 kg
610mm - 21 kg

Hosereel capacity in metres
 

Hose Size (NB) R310HP R460HP R610HP
3/4"  62 93 137
1" (with beads) 39 (11) 64 (18) 88 (25)
1 1/4" (with beads) 24 (9) 35 (14) 53 (21)
1 1/2" (with beads) 22 (4) 33 (5) 48 (8)

HOSEREELS ASSEMBLIES

Hydraulic Rewind (motor and controls not included)
R310HP
: 310mm (12”) High Pressure hosereel c/w motor mount bracket.
R460HP: 460mm (18”) High Pressure hosereel c/w motor mount bracket.
R610HP: 610mm (24”) High Pressure hosereel c/w motor mount bracket.

MOTOR AND CONTROL ASSEMBLIES
Hydraulic Motor
1295
: HYD MOTOR DANFOSS (for hosereels).

Cartwheel/Catherine type hosereels: AHR250 series.

Aviation Drum style hosereels: AHR250D series (suit 2” and 2½” hoses).

Recommended hose: Continental/Elaflex/Alfagomma suction or delivery hose.

Recommended swivels: Liquip SJ series swivels or OPW swivels.
Industrial nozzles:

210L0104LLIQUIP: NOZZLE 1¼” BSPP C/W SPOUT OPW 210 SERIES HIGH FLOW

210L0105LLIQUIP: NOZZLE 1½” BSPP C/W SPOUT OPW 210 SERIES HIGH FLOW