ROM3 On Board Monitor

 

Liquip offers an extremely small and lightweight on board overfill
protection monitor or an integrated overfill and retained product
protection monitor.

Liquip’s ROM III series of monitors provide real world safeguarding
against costly overfills every day. These monitors are designed and
manufactured to deliver years of high performance, even under the
extreme conditions.

These monitors can be used to provide fuel overfill monitoring in a
single compartment road tanker/storage tank or to provide a dedicated earth assurance device for use at a terminal.

The ROM III monitor detects and communicates a pending overfill
condition to a loading rack control monitor, and signals which tank
compartment is overfilled.

The ROM III monitor (3308R-LIQ) can also detect and communicate a retain condition to a loading rack control monitor. This control system will enable a tank truck/trailer to load at API optic, thermistor or float petroleum loading rack monitors while using only two wire optic sensors. If all of the optic sensors do not detect any liquids, the monitor provides the necessary signal information to the appropriate API sockets to enable loading of the tank trailer truck.


The ROM III Onboard Monitor has been designed for use with any Liquip 2-Wire Overfill Sensors.

 

Features & Benefits

• Extremely small, lightweight.
• Support for tanks with up to 8 compartments using 2-wire overfill and retain sensors.
• Detects and communicates the sensor status and overall unit’s “permissive to load” (the tanker) status to a loading rack monitor via its socket outputs.
• 2 relay contacts one I.S. and one NON I.S.
• Diagnostic capabilities with optic rack monitors.
• Low power indication.
• Relay outputs can connect directly to a pump, control valve, alarm etc.
• Can replace Liquip’s MPP102 mini monitor. Contact Liquip for change out procedure. (Doc No. P 59132).
• For a full list of features please contact Liquip for a copy of the ROM III IOM (Doc No. H53265PAL).

ADD TO ENQUIRY CART  REQUEST A QUOTE 

Recommended products for replacement

    Technical Information

    Safety Approvals 
    FM, ATEX and IECEx (zone 2).

    Input Voltage range 
    9V to 30 VDC.

    Input Voltage Fuse
    Max. 0.5A, slow blow, located in safe zone.

    Ambient Operating Temperature
     -40ºC to +70ºC.

    Max Surface Temperature
     +135ºC.

    Non I.S. Relay (TB1) Voltage
     30 V.

    Non I.S. Relay (TB1) Relay Current
     5 A.

    I.S. AUX Out (TB4) Voltage
     20 V.

    I.S. AUX Out (TB4) Current
     50 mA.

    Materials
    Aluminium housing enclosure with a windowed cover.

    Mounting
    4 x 7/16" mounting holes using 4 x 8mm bolts.

    Ingress Protection
    IP54 rated.

    Weight 
    2kg (TBC).

    Ordering Information

    LIQ3308-LIQZ: Kit comprises of ROM III OBM + 1910A terminator. 

    LIQ3308-LIQ: ROM III OBM replacement (or when no dummy probe is required).

     

    Associated Equipment

    Probes: LDP202 Aluminium and Stainless Steel Series. 

    EAC201: Earth Assurance Clamp.

    JB100: Junction Box.

    LIQ1910A: ROM terminator probe

    Resources
    Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
    Submit Enquiry 
    Submit a product Enquiry / Quote to Liquip customer service
    Save as Wishlist 
    Save as Wishlist - handy function for account holders
    Send to a Friend 
    Send you selection of products to a friend via a convenient email link
    Item Description
    Add Item into Enquiry Cart
    LIQ3308-LIQ ROM III OBM
    LIQ3308-LIQZ Kit comprises of ROM III OBM + 1910A terminator

    Item added into a Enquiry Cart

    Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.

    Related Products

      Interested?

      Contact us for a quote or for further information.
      Are you enquiring about multiple products? Consider using our Enquiry Cart