Vapour Coupler - VCF075W
Vapour couplers allow for vapour transfer between tanker trucks and loading/unloading tanks.
Liquip's vapour couplers automatically open when connected to a compatible vapour adaptor and automatically seal when disconnected.
Liquip offers a 100mm female camlock to 100mm male hosetail vapour coupler that can be used for vapour transfer between the tank truck and loading/unloading tank.
The VCF075W complies with AS5602:2009 and is a Ø75mm equivalent flow area and a spring loaded coupler that automatically opens when coupled with a compatible adaptor.
Features & Benefits
- Low pressure drop.
- Unique poppet design provides lower pressure drops than standard poppets at high flows rates.
- Spring loaded poppet retains vapours until coupled to the male vapour adaptor.
- Automatically opens and closes when connected to male adaptor.
- Universal 4" (100mm) camlock connection.
- Ø75mm equivalent flow area
- 100mm hose tail.
4500mm2 = (76 dia hole).
Poppet opens between 4 to 6 kPa vacuum for tank protection.
-Aluminium body and poppet.
-Brass cam levers.
-Stainless steel spring and central plunger.
-Nitrile poppet seal and nitrile camlock seal.
Complies with AS5602:2009: Refined petroleum products—Vehicle bottom loading and vapour recovery. (selectivity counter-bore provided).
Complies with Australian SLP.
100mm hose tail.
4” NATO standard camlock.
VCF075W: 100mm Female Camlock to 100mm Male Hosetail vapour coupling.
VCF500: 100mm bore through, 4” TTMA flange mount & viewing sightglass. (Not to AS:5602 and therefore not suitable for use in Australia).
VCM450: Vapour adaptor 100mm (4") flow through.
VCM3P: Vapour adaptor with promixty switch holder.
VCM3-F: Al Vapour adaptor 100mm Male to 100mm TTMA flange.
VCFPA: Vapour parking adaptor with proximity switch holder.