VFGM Series SuperFlex™ Monitor Housings

 

Facet VFGM Series SuperFlex™ monitor housings, equipped with FG-O Series 6” (152 mm.) OD cartridges, continually check for the entire flow of fuel, not just mere samples, for water or solids contamination. By performing three jobs, the monitors assure clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids, and shut down system flow when hit with a localized slug of water. They are designed to flow from the outside to inside.

Facet’s VFGM Series SuperFlex™ monitor housings are built to ASME Code, constructed of carbon steel. Stainless steel  construction is available. Contact your Facet Representative for details. They are furnished with FG-O Series 6” monitor cartridges that meet the latest edition of EI specification 1583 Aviation Fuel Filter Monitors with Absorbent Type Elements.

Features & Benefits
  • Welded carbon steel construction
  • Built to ASME Code, Section VIII, Div. 1, stamped and certified
  • Assure clean, dry fuel
  • Designed to flow from the outside to inside
  • Elements that meet the latest edition of EI 1583 Aviation Fuel Filter Monitors with Absorbent type elements.

ADD TO ENQUIRY CART  REQUEST A QUOTE 

Recommended products for replacement

    Technical Information
    • Welded carbon steel construction
    • ASME Code, Section VIII construction, stamped and certified
    • Design pressure: 250 psi @ 250 °F (17.2 bar @ 121 ºC)
    • Main closure: Blind flange
    • Head gasket: Buna-N—other materials available on request
    • Vent connection: ¾" NPT
    • Drain connection: ¾" 3000# NPT
    • Inlet and outlet connections: 2" 3000# NPT
    • Differential pressure gauge connection: 1∕8" NPT
    • Interior: Epoxy coated (EI 1541)
    • Exterior: Prime coated

      Options
    • Air eliminator
    • Air eliminator check valve
    • Manual drain valve
    • Pressure gauge assembly
    • Pressure relief valve
    • Sampling probes
    • Adjustable support stand

    WARNING: MONITOR CARTRIDGES SHOULD NEVER BE USED WITH FUELS CONTAINING ANTI-ICING ADDITIVES SUCH AS FSII, PRIST AND DI-EGME. THIS INCLUDES PRE-MIXED AND MILITARY FUELS CONTAINING THESE ADDITIVES. THE USE OF MONITOR CARTRIDGES WITH FUELS CONTAINING ANTI-ICING ADDITIVES MAY RESULT IN (1) A FAILURE OF THE MONITOR CARTRIDGE AND/OR (2) MIGRATION OF FILTRATION MEDIA INTO THE FUEL STREAM, EITHER OF WHICH COULD POTENTIALLY CAUSE DAMAGE TO OR SUDDEN FAILURE OF THE CORRESPONDING ENGINE. THE SUPPLIER SHALL NOT BE LIABLE IN ANY RESPECT FOR ANY DAMAGE OR LOSS THAT ARISES FROM THE USE OF MONITOR CARTRIDGES WITH FUELS CONTAINING ANTI-ICING ADDITIVES. SUCH USE IS ENTIRELY AT THE USER’S RISK.

    Ordering Information
    Item Flow Rate Weight Liquid Volume
    gpm lpm lbs kg gal litre
    VFGM-1C-1614 58 220 100 45 7 26
    VFGM-2C-1629 116 439 125 56 10 38
    VFGM-3C-1643 173 654 200 90 13 49

    Model numbers include housing, cartridge mounting hardware, and cartridges not installed.
    All dimensions, weights and volumes are for estimating only.

    Resources
    Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
    Submit Enquiry 
    Submit a product Enquiry / Quote to Liquip customer service
    Save as Wishlist 
    Save as Wishlist - handy function for account holders
    Send to a Friend 
    Send you selection of products to a friend via a convenient email link
    Item Description
    Add Item into Enquiry Cart

    Item added into a Enquiry Cart

    Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.

    Related Products

      Interested?

      Contact us for a quote or for further information.
      Are you enquiring about multiple products? Consider using our Enquiry Cart