2" FG Series Fuel-Gard® - Outside/Inside Flow

 

Monitor Cartridges
6th Edition EI 1583 Qualified

The Facet 2" Model FG Fuel-Gard® monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard® monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Fuel-Gard® monitor cartridges meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors with Absorbent Type Elements.

Each Model FG Fuel-Gard® monitor cartridge is constructed of various water absorbent media, plus fine filtration layers wrapped around a molded center tube for balanced flow and structural strength - all encased in a protective outer sock material. The end cap material is of injection molded, glass-filled nylon which provides superior strength and ease of maintenance. This material gives excellent support for the o-ring on the mounting/adapter end.

Features & Benefits
  • Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
  • Multi-layered media for increased solids holding, water removal and shutdown protection
  • New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
  • Structurally withstands a minimum of 174 psi (12 kg/cm²)
  • Not adversely affected by exposure to temperatures varying from -65ºF (-54ºC) to 160ºF (71ºC)

ADD TO ENQUIRY CART  REQUEST A QUOTE 

Recommended products for replacement

    Technical Information

    Approvals
    6th Edition EI 1583 Qualified.

    WARNING: MONITOR CARTRIDGES SHOULD NEVER BE USED WITH FUELS CONTAINING ANTI-ICING ADDITIVES SUCH AS FSII, PRIST AND DI-EGME. THIS INCLUDES PRE-MIXED AND MILITARY FUELS CONTAINING THESE ADDITIVES. THE USE OF MONITOR CARTRIDGES WITH FUELS CONTAINING ANTI-ICING ADDITIVES MAY RESULT IN (1) A FAILURE OF THE MONITOR CARTRIDGE AND/OR (2) MIGRATION OF FILTRATION MEDIA INTO THE FUEL STREAM, EITHER OF WHICH COULD POTENTIALLY CAUSE DAMAGE TO OR SUDDEN FAILURE OF THE CORRESPONDING ENGINE. THE SUPPLIER SHALL NOT BE LIABLE IN ANY RESPECT FOR ANY DAMAGE OR LOSS THAT ARISES FROM THE USE OF MONITOR CARTRIDGES WITH FUELS CONTAINING ANTI-ICING ADDITIVES. SUCH USE IS ENTIRELY AT THE USER’S RISK

    Ordering Information
    Item Nominal Length Outside Diameter Insider Diameter
      in mm in mm in mm
    FG-205-7 5 7/8 150 1 ¾ 45 7/8 23
    FG-207-7 7 11/16 195 1 ¾ 45 7/8 23
    FG-210-7 10  7/8 176 1 ¾ 45 7/8 23
    FG-215-7 15 7/8 404 1 ¾ 45 7/8 23
    FG-217-7 17 7/8 454 1 ¾ 45 7/8 23
    FG-220-7 20 7/8 531 1 ¾ 45 7/8 23
    FG-225-7 25 7/8 658 1 ¾ 45 7/8 23
    FG-230-7 30 7/8 785 1 ¾ 45 7/8 23
    Resources
    Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
    Submit Enquiry 
    Submit a product Enquiry / Quote to Liquip customer service
    Save as Wishlist 
    Save as Wishlist - handy function for account holders
    Send to a Friend 
    Send you selection of products to a friend via a convenient email link
    Item Description
    Add Item into Enquiry Cart
    FG-205-7 Nominal Length (5⅞" / 150mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-207-7 Nominal Length (7¹¹⁄₁₆" / 195mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-210-7 Nominal Length (10⅞" / 176mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-215-7 Nominal Length (15⅞" / 404mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-217-7 Nominal Length (17⅞" / 454mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-220-7 Nominal Length (20⅞" / 531mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-225-7 Nominal Length (25⅞" / 658mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    FG-230-7 Nominal Length (30⅞" / 785mm), Outside Diameter (1¾" / 45mm), Insider Diameter (⅞" / 23mm)
    View Enquiry Cart

    Item added into a Enquiry Cart

    Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.
    View Enquiry Cart

    Related Products

      Interested?

      Contact us for a quote or for further information.
      Are you enquiring about multiple products? Consider using our Enquiry Cart