Facet HFG Series Horizontal Fuel-Gard® monitor housings

 

The Facet HFG Series Horizontal Fuel-Gard® monitor housings, equipped with Facet’s FG Series monitor cartridges, continually check the entire flow of fuel, not just mere samples, for water or solids contamination. By performing three jobs, the FG Series monitors assure clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids, and shut down system flow when hit with a localized slug of water.

They are designed to flow from the outside to inside at a rate of 1 gpm (3.79 lpm) per inch of length.

Facet’s Fuel-Gard® monitor housings are built to ASME Code, constructed of carbon steel and designated for maximum working pressure of 150 psi (10.3 bar). They are furnished with FG Series monitor cartridges that meet and exceed the latest edition of EI Specification 1583 Aviation Fuel Filter Monitors with Absorbent Type Elements.

Features & Benefits
  • Welded carbon steel construction —other materials available on request
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified.
  • Designed to flow from the outside to inside at a rate of 1 gpm (3.79 lpm) per inch of length.

Ordering Information

Contact Liquip For specific descriptions

Model Number Flow Rate Required Cartridges Liquid Volume Dry Weight Housing Type
gpm lpm Qty Model gal ltr lbs kg

HFG-C-5210

50 189 5 FG-210-7 3 11 235 107 FLAT

HFG-C-5220

100 379 5 FG-220-7 4 15 250 113 FLAT

HFG-C-5230 

150 568 5 FG-230-7 5.5 21 265 120 FLAT

HFG-C-10220

200 757 10 FG-220-7 7.5 28 310 141 FLAT

HGF-C-10230

300 1136 10 FG-230-7 10 38 350 159 FLAT

HFG-C-20230

600 2271 29 FG-230-7 20 76 385 175 FLAT

HFG-C-30230

900 3406 30 FG-230-7 30 114 450 204 FLAT

HFG-C-40230

1200 4542 40 FG-230-7 40 151 490 222 FLAT
Technical Inforamtion
  • ASME Code, Section VIII construction, stamped and certified
  • Maximum working pressure: 150 psi (10.3 bar)
  • Swing bolt closures on 85∕8" (219 mm.) OD housings and larger
  • Buna-N closure o-ring—other materials available
  • Exterior: Prime coated
  • Interior: Epoxy coated (EI 1541)
  • Spider plate Standard Connections 
  • Flanged inlet and outlet connections 
  • Drain connection: ¾" NPT 
  • Vent and relief valve connections: ¾" NPT 
  • Differential pressure gauge connections: ¼" NPT
     

Options 

  • Automatic air eliminator* 
  • Automatic air eliminator check valve 
  • Pressure relief valve* 
  • Differential pressure gauge* 
  • Sampling probes* 
  • Manual drain valve 
  • Victaulic inlet and outlet connections 
  • Interlock Device

*Mandatory for EI 1596 2nd Edition

Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
Submit Enquiry 
Submit a product Enquiry / Quote to Liquip customer service
Save as Wishlist 
Save as Wishlist - handy function for account holders
Send to a Friend 
Send you selection of products to a friend via a convenient email link
Image Item Description
Add Item into Enquiry Cart

Item added into a Enquiry Cart

Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.

Related Products

    Recommended products for replacement

      Interested?

      Contact us for a quote or for further information.
      Are you enquiring about multiple products? Consider using our Enquiry Cart