HP Series Single-Stage Coalescer-Housings

 

Facet HP Series single-stage water coalescers, commonly referred to as repack or hay pack housings, are horizontal, cylindrically shaped housings designed to protect filtration systems from gross amounts of water and solid contaminants.

Facet recommends using their wafer style repack coalescers since they allow the first two sections to be replaced when required. The third and successive sections require fewer change outs since they may remain relatively free of solids.

Coalescing first starts as the product enters the vessel. Due to the substantially reduced velocity, free water will fall out by gravity. While the product progresses through the mass packed media, further coalescing occurs by impingement of water droplets on the media. At the same time, solids tend to fall out as the liquid enters the housing at a reduced velocity, but are further removed by filtration as the flow continues through the mass media.

All Facet HP Series single-stage water coalescer housings are built to ASME Code, Section VIII, with many standard and optional accessories available to facilitate individual installation requirements.

Facet HP Series single-stage coalescers use wafer repacks to remove gross amounts of water and solids from fuel. They are available in several standard sizes to accommodate flows from 10 to 2000 gpm (38 to 7570 lpm). They provide protection to filtration systems from gross amounts of water and solids that are commonly carried through inbound transport pipelines.

HP Series housings offer an option of using coalescer cartridges for more efficient solids separation and liquid-liquid water separation. Use of an adaptor kit permits returning to the use of repacks at any time.

HP Series housings have no internal moving parts and are designed for easy servicing, thereby reducing maintenance costs. Each housing is manufactured with quality workmanship and materials to give long-lasting and dependable service.

Features & Benefits
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified.
  • No internal moving parts
  • Design for easy servicing.

ADD TO ENQUIRY CART  REQUEST A QUOTE 

Recommended products for replacement

    Ordering Information
    Model Number Flow Rate(1) Liquid Volume Shipping Weight Connections
    Inlet/Outlet Diameter Vent & Relief Drain Level gauge Level Control
    gpm lpm gal ltr lbs kg in mm in mm in mm in mm in mm
    Style A
    HP-10 6 23 2 7 150 68 1 25 ½ 13 ½ 13 ¾ 19 ¾ 19
    HP-25 15 57 10 38 310 141 38 ½ 13 ½ 13 ¾ 19 ¾ 19
    HP-50 26 98 18 68 345 156 38 ½ 13 ½ 13 ¾ 19 ¾ 19
    HP-100 60 227 46 174 1550 703 3 76 ¾ 19 ¾ 19 ¾ 19 1 25
    Style B
    HP-150 100 379 77 291 1815 824 3 76 ¾ 19 ¾ 19 ¾ 19 38
    HP-200 155 587 152 575 2100 954 3 76 1 25 1 25 ¾ 19 38
    HP-300 255 852 201 761 2300 1045 4 102 1 25 38 ¾ 19 38
    HP-500 350 1325 313 1185 3100 1407 6 152 1 25 38 ¾ 19 38
    HP-750 510 1930 610 2309 4000 1816 6 152 38 2 51 ¾ 19 38
    HP-1000 720 2725 742 2809 4600 2088 8 203 38 2 51 ¾ 19 2 51
    HP-1500 940 3558 969 3668 5200 2361 8 203 38 2 51 ¾ 19 2 51
    HP-1800 120 4542 1428 5405 6200 2815 10 254 38 2 51 ¾ 19 2 51
    HP-2000 1425 5394 2116 8010 8000 3632 10 254 38 2 51 ¾ 19 2 51

    (1) Flow rates based on Jet Fuel @ .79 specific gravity.

     

     

    Technical Information

    Materials
    Welded carbon steel construction 

    Design Code
    ASME Code, Section VIII construction, stamped and certified 

    Design pressure
    150 psi @ 250 °F (10.3 bar @ 121 ºC) 

    Housing closure
    Blind cover on housings less than 14" (356 mm) OD
    Swing bolt closure on housings 14" (356 mm) OD and larger 

    Housing covers
    Removable on housings up to 14" (356 mm) OD
    Hinged on housings 14" (356 mm) thru 36" (914 mm) OD
    Rotating davits on housings 42" (1067 mm) OD and larger

    Standard Connections
    Inlet and Outlet: 150# RF (ANSI) Flanged.
    All other connections are 3000# NPT female type couplings.

    Options
    Steel stands available
    Internal epoxy coating

    Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
    Submit Enquiry 
    Submit a product Enquiry / Quote to Liquip customer service
    Save as Wishlist 
    Save as Wishlist - handy function for account holders
    Send to a Friend 
    Send you selection of products to a friend via a convenient email link
    Item Description
    Add Item into Enquiry Cart

    Item added into a Enquiry Cart

    Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.

    Related Products

      Interested?

      Contact us for a quote or for further information.
      Are you enquiring about multiple products? Consider using our Enquiry Cart