Horizontal HCS (Category C or M) - Filter Water Separators

 

HCS Series (End Opening)

Horizontal Coalescer Separators for Fixed Installations

6th Edition EI 1581, Category C, Type S Qualified

Category C Coalescer Separator housings are for commercial aviation fuel. Type S qualifications can be used at all filtration points in an aviation fueling system. Type S is meant to be used at filtration points where significant levels of water and dirt in the product can be expected. Facet HCS Series Horizontal Coalescer Separator housings fully comply with EI 1581, Category C, Type S requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage, terminals, heliports, airports, etc.

Models HCS (End Opening)

Horizontal Coalescer Separators for Fixed Installation

6th Edition EI 1581, Category M, Type S Qualified

Category M Coalescer Separator housings are for Military F24, JP-8 or JP-5 fuel. Type S qualifications can be used at all filtration points in an aviation fueling system. Type S is meant to be used at filtration points where significant levels of water and dirt in the product can be expected. Facet HCS Series Horizontal Coalescer Separator housings fully comply with EI 1581, Category M, Type S requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage, terminals, heliports, airports, etc.

Models HCS (End Opening)

Horizontal Coalescer Separators for Mobile Equipment

6th Edition EI 1581, Category C, Type S-LW Qualified

Category C Coalescer Separator housings are for commercial aviation fuel. Type S-LW qualification can be used for mobile applications where minimum amounts of water and dirt in the product are expected. Facet HCS Series Horizontal Coalescer Separator housings fully comply with EI 1581, Category C, Type S-LW requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage, terminals, heliports, airports, etc.

Models HCS (End Opening)

Horizontal Coalescer Separators for Mobile Equipment

6th Edition EI 1581, Category M, Type S Qualified

Category M Coalescer Separator housings are for Military F24, JP-8 or JP-5 fuel. Type S qualification can be used for mobile applications where minimum amounts of water and dirt in the product are expected. Facet HCS Series Horizontal Coalescer Separator housings fully comply with EI 1581, Category M, Type S requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage, terminals, heliports, airports, etc.

Models HCS-M (Side Opening)

Horizontal Coalescer Separators for Mobile Equipment

6th Edition EI 1581, Category C, Type S-LW Qualified

Category C Coalescer Separator housings are for commercial aviation fuel. Type S-LW qualifications can be used for mobile applications where minimum amounts of water and dirt in the product are expected. Facet HCS-M (side open) Series Horizontal Coalescer Separator housings fully comply with EI 1581, Category C, Type S-LW requirements.

Reliable Performance

Facet coalescer separators are a result of over 75 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry. This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in refineries, bulk storage, terminals, heliports, airports, etc.

Features & Benefits
  • Designed to be used in:
    • Type S filtration points i.e. where significant levels of water and dirt in the product can be expected.
    • Type S-LW mobile applications i.e. where minimum amounts of water and dirt in the products are expected.
  • Can be supplied in horizontal configurations.
  • Can be supplied for different categories e.g. C or M.
  • EI 1596 Design & Construction
  • Welded carbon steel construction—other materials available on request • ASME Code, Section VIII construction, stamped and certified.

ADD TO ENQUIRY CART  REQUEST A QUOTE 

Recommended products for replacement

    Technical Information

    HCS Series (End Opening) Category C (Commercial) Type S

    • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request
    • Inlet, outlet and drain connections permanently marked
    • Interior: Epoxy coated (EI 1541)
    • Exterior: Prime coated
    • Swing bolt head closures
    • Hinged end opening cover
    • Flanged inlet and outlet connections 
    • Buna-N o-ring closure seal
    • Choice of rod or screw base coalescer cartridge mounting styles
    • 4” inlet/outlet cleanout/inspection connections (when permitted by design)
    • Knife edge cartridge mounting seals
    • Spider plate attached to vessel wall

    Options

    • Automatic air eliminator* with check valve
    • Pressure relief valve*
    • Differential pressure gauge*
    • Pilot control valve
    • Pilot tester
    • Water slug control valve
    • Electrical water-level alarm
    • Water drain valves
    • Liquid level gauge
    • Blind cover for pilot control mounting flange
    • Immersion heaters
    • Sampling probes*
      (* Mandatory for EI 1596 2nd Edition)

    HCS Series (End Opening) Category M (Military) Type S

    • EI 1596 Design & Construction
    • Welded carbon steel construction—other materials available on request
    • ASME Code, Section VIII construction, stamped and certified
    • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request • Inlet, outlet and drain connections permanently marked
    • Interior: Epoxy coated (EI 1541)
    • Exterior: Prime coated
    • Swing bolt head closures
    • Hinged end opening cover
    • Flanged inlet and outlet connections
    • Buna-N o-ring closure seal
    • Choice of rod or screw base coalescer cartridge mounting styles
    • 4” inlet/outlet cleanout/inspection connections (when permitted by design)
    • Knife edge cartridge mounting seals
    • Spider plate attached to vessel wall
      Options
    • Automatic air eliminator* with check valve
    • Pressure relief valve*
    • Differential pressure gauge*
    • Pilot control valve
    • Pilot tester
    • Water slug control valve
    • Electrical water-level alarm
    • Water drain valves
    • Liquid level gauge
    • Blind cover for pilot control mounting flange
    • Immersion heaters
    • Sampling probes*
      (* Mandatory for EI 1596 2nd Edition)

    HCS Series (End Opening) Category C (Commercial) Type S-LW

    • EI 1596 Design & Construction
    • Welded carbon steel construction—other materials available on request
    • ASME Code, Section VIII construction, stamped and certified
    • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request • Inlet, outlet and drain connections permanently marked
    • Interior: Epoxy coated (EI 1541)
    • Exterior: Prime coated
    • Swing bolt head closures
    • Hinged end opening cover
    • Victaulic inlet and outlet connections
    • Buna-N o-ring closure seal
    • Choice of rod or screw base coalescer cartridge mounting styles
    • Knife edge cartridge mounting seals
    • 4" inlet/outlet cleanout/inspection connections (when permitted by design)
    • Spider plate attached to vessel wall
      Options
    • Water defense system*
    • Automatic air eliminator* with check valve
    • Pressure relief valve*
    • Differential pressure gauge*
    • Pilot control valve
    • Blind cover for pilot control mounting flange
    • Sampling probes*
      (* Mandatory for EI 1596 2nd Edition)

    HCS Series (End Opening) Category M (Military) Type S

    • EI 1596 Design & Construction
    • Welded carbon steel construction—other materials available on request
    • ASME Code, Section VIII construction, stamped and certified
    • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request
    • Inlet, outlet and drain connections permanently marked
    • Interior: Epoxy coated (EI 1541)
    • Exterior: Prime coated
    • Swing bolt head closures
    • Hinged end opening cover
    • Victaulic inlet and outlet connections
    • Buna-N o-ring closure seal
    • Choice of rod or screw base coalescer cartridge mounting styles
    • Knife edge cartridge mounting seals
    • 4" inlet/outlet cleanout/inspection connections (when permitted by design)
    • Spider plate attached to vessel wall
      Options
    • Water defense system*
    • Automatic air eliminator* with check valve
    • Pressure relief valve*
    • Differential pressure gauge*
    • Pilot control valve
    • Blind cover for pilot control mounting flange
    • Sampling probes*
      (* Mandatory for EI 1596 2nd Edition)

    HCS-M Series (SideOpening) Category C (Commercial) Type S-LW

    • EI 1596 Design & Construction
    • Welded carbon steel construction—other materials available on request
    • ASME Code, Section VIII construction, stamped and certified
    • Design pressure: 150 psi @ 250 ˚F (10.3 bar @ 121 ºC) — other design pressures available on request
    • Inlet, outlet and drain connections permanently marked
    • Interior: Epoxy coated (EI 1541)
    • Exterior: Prime coated
    • Swing bolt head closures
    • Hinged Manway
    • Victaulic inlet and outlet connections
    • Buna-N o-ring closure seal
    • Choice of rod or screw base coalescer cartridge mounting styles
    • Knife edge cartridge mounting seals
    • 4" inlet/outlet cleanout/inspection connections (when permitted by design)
    • Spider plate attached to vessel wall
      Options
    • Water defense system*
    • Automatic air eliminator* with check valve
    • Pressure relief valve*
    • Differential pressure gauge*
    • Pilot control valve
    • Blind cover for pilot control mounting flange
    • Sampling probes*
      (* Mandatory for EI 1596 2nd Edition)
    Ordering Informatiom

    Contact Liquip for parts suitability and ordering. 

    Resources
    Use your Enquiry Cart to make an enquiry, send your collection to a friend via email, or add your item into your wishlist.
    Submit Enquiry 
    Submit a product Enquiry / Quote to Liquip customer service
    Save as Wishlist 
    Save as Wishlist - handy function for account holders
    Send to a Friend 
    Send you selection of products to a friend via a convenient email link
    Item Description
    Add Item into Enquiry Cart
    644964 Grounding Cable
    VF-21SB-PG2 Housing with 1/8" NPT connection to accommodate an external differential pressure gauge (supplied by others)
    VF-22SB-PG2 Housing with 1/8" NPT connection to accommodate an external differential pressure gauge (supplied by others)
    VF-21SB Housing only
    VF-21SB-PG Housing w/ Direct Reading Differential Pressure Gauge
    VF-21SB-PGS Housing w/ Direct Reading Differential Pressure Gauge & Sight Glass
    VF-21SB-PGWP Housing w/ Direct Reading Differential Pressure Gauge & ¾" NPT Coupling for Water Probe
    VF-21SB-S Housing w/ Sight Glass
    VF-21SB-WP Housing w/ ¾" NPT Coupling for Water Probe
    VF-22SB Housing only
    VF-22SB-PG Housing w/ Direct Reading Differential Pressure Gauge
    VF-22SB-PGS Housing w/ Direct Reading Differential Pressure Gauge & Sight Glass
    VF-22SB-PGWP Housing w/ Direct Reading Differential Pressure Gauge & ¾" NPT Coupling for Water Probe 
    VF-22SB-S Housing w/ Sight Glass
    VF-22SB-WP Housing w/ ¾" NPT Coupling for Water Probe
    644160 Mounting Bracket 

    Item added into a Enquiry Cart

    Use your Enquiry Cart to make an enquiry, save your cart as wishlist or send your collection to a friend via email.

    Related Products

      Interested?

      Contact us for a quote or for further information.
      Are you enquiring about multiple products? Consider using our Enquiry Cart