Categories

Pressure Refueling Nozzle - 64348 series (Obsolete product)

Sorry About That… This Product is an Obsolete Item…

This product is no longer available. To assist you with finding an alternative product that will perform the same function we have offered some suggested replaceable products below. 

We have also made information about obsolete products available to assist with purchasing spare parts that may still be available. You can view obsolete product information by searching for product codes in our SEARCH bar. 

If you would like any further information regarding our parts please don’t hesitate to contact your local Liquip representative and we will get back to you as quickly as possible. 
 

Eaton’s Carter Model 64348 underwing fueling nozzle has been used worldwide in the aircraft fueling industry for many years. It includes a true swivel disconnect and compact flow control handle, allowing easy connection to the aircraft.

  • Easier swiveling under all conditions. Swivel independent of quick disconnect (QD)
  • Connects to 3-lug international standard aircraft adapter
  • Designed in accordance with new SAE design specification for commercial nozzles AS5877
  • Self-adjusting pressure- loaded nose seal. No mechanical adjustments or springs used. Leak free under extreme side loads, worn adapters and extreme temperatures.
  • Optional easy change nose seal — no tools required
  • Lead-in ramps (interface with aircraft adapter lugs) of stainless steel for longer life
  • Positive mechanical inter-lock — nozzle cannot be opened until connected to aircraft and cannot be removed from aircraft in the open position
  • Flow control handle of high strength zinc-aluminum alloy
  • Replaceable bicycle handles and grips standard for ease of operation. Circular grip optional.
  • Two threaded ports in nozzle body for simultaneous vacuum breaker and product sampling fitting installation are standard
  • Lightweight and rugged
  • Modular construction with use of bolt flanges minimized
  • 2, 2½, and 3-inch NPT and BSPP threaded QD inlets available
  • Optional 40, 60 and 100-mesh screens retained with snap rings for ease of removal
  • 35 psi (2.413 bar), 45 psi (3.103 bar) & 55 psi (3.792) hose end control valves (HECV) available
  • Dry break or ball valve for easy strainer inspection available
  • Low pressure drop
  • Optional bonding cable and vacuum breaker
  • Redundant safety lock on QD

Envelope Dimensions
Dimensions shown in inches (millimetres)
A = Various options available.

Contact the Liquip Sales Department for assistance in determining which of the numerous models and options available will best suit your application.