Heavy-Duty Refueling Nozzle 64250 (Obsolete product)
Eaton’s Carter product line includes several standard underwing refueling nozzle models. A nozzle derived from earlier Model 64200 has been introduced, primarily for those airports that have extremely heavy-duty requirements. Model 64250 Heavy-Duty Refueling Nozzle, in addition to being designed for rugged, heavy-duty use, has several new features outlined below.
Sorry About That… This Product is an Obsolete Item…
This product is no longer available. To assist you with finding an alternative product that will perform the same function we have offered some suggested replaceable products below.
We have also made information about obsolete products available to assist with purchasing spare parts that may still be available. You can view obsolete product information by searching for product codes in our SEARCH bar.
If you would like any further information regarding our parts please don’t hesitate to contact your local Liquip representative and we will get back to you as quickly as possible.
Features & Benefits
- Easier swivelling under all conditions. Swivel independent of quick disconnect.
- Connects to 3-lug international standard aircraft adapter
- Designed in accordance with new SAE design specification for commercial nozzles AS5877
- Self-adjusting pressure loaded nose seal. Leak free under extreme side loads, worn adapters and extreme temperatures.
- Uses same accessories as earlier 64200 and 64348 models. All accessories now have stainless steel wear ring in swivel ball joint.
- Lead-in ramps (interface with aircraft adapter lugs) of high strength aluminum for longer life
- Positive mechanical interlock — nozzle cannot be opened until connected to aircraft; cannot be removed from aircraft in open position
- Interlock mechanism internal to nozzle body
- No collar or other moving parts on exterior of nozzle with the exception of the operating lever
- Two threaded ports in nozzle body for simultaneous vacuum breaker and product sampling fitting installation are standard
- Lightweight and most rugged of any Eaton nozzle
- Modular construction with use of bolt flanges minimized
- 2, 2½ and 3-inch NPT and BSPP and 3-inch JIS threaded quick disconnect (QD) inlets available
- Optional 40, 60 & 100-mesh screens retained with snap rings for ease of removal
- Operating lever replaceable from exterior of nozzle and is made of less expensive, more ductile material. Also backed up with boss on nozzle body to prevent bending.
- 35 psi (2.413 bar), 45 psi (3.103 bar) & 55 psi (3.792 bar) Hose End Control Valves (HECV) available
- Dry break or ball valve for easy strainer inspection available
- Low pressure drop
- Optional bonding cable and vacuum breaker
- Redundant safety lock on the QD
- Replaceable knob on operating handle eliminates razor sharp wear patterns prevalent on competitor’s nozzles
- Options include a “U” bracket for nozzle stowage and one piece stirrup handle with stowage capability. No need to use an aircraft adapter as a stowage device.
Recommended products for replacement
Interested?
Contact us for a quote or for further information.
Are you enquiring about multiple products? Consider using our Enquiry Cart